High-Quality Aliphatic Examples Products – SWD8030 two component polyaspartic top coating – SWD
High-Quality Aliphatic Examples Products – SWD8030 two component polyaspartic top coating – SWD Detail:
Product features and advantages
* The coating film is tough, dense, full and bright with bright colors
* No discoloration, no yellowing, no pulverization, anti-aging, excellent weather resistance, light and color retention decoration performance
* Excellent adhesive strength, good compatibility with polyurethane, epoxy, chlorinated rubber, alkyd, phenolic and other coatings
*Excellent wear and impact resistance
*Excellent chemical resistance, such as acid, alkali, salt, etc
*Excellent corrosion resistance
*Excellent waterproof performance
*Excellent durability reduces maintenance costs
*Prolong the service life of spraying structure
Application scopes
All kinds of concrete, all kinds of metal structure surface anti-corrosion protection decoration.
Product information
Item | Part A | Part B |
appearance | Light yellow liquid | Color adjustable |
specific gravity (g/m³) | 1.02 | 1.32 |
Viscosity (cps) @25℃ | 230 | 210 |
solid content (%) | 52 | 84 |
Mixing ratio ( by weight) | 1 | 2 |
surface dry time (h) | 1-2 h | |
Coating interval (h) | Min 2h; Max 24 h(20℃) | |
Theoretical coating rate (surface dry film thickness) | 0.10kg/㎡DFT 60μm |
physical properties
Item | Testing standard | results |
Adhesive force | GB/T 6742-2007 | ≥2.5Mpa |
Bending resistance | GB/T 6742-2007 | 1mm |
abrasion resistance(750g/500r) mg | HG/T 3831-2006 | 5 |
impact resistance kg·cm | GB/T 1732 | 50 |
Weather resistance, Artificial accelerated aging,1000h | GB/T14522-1993 | color loss<1, pulverization<1 |
Chemical resistance
Acid resistance 10%H2SO4 or 10%HCI,240h | No rust, no bubbles, no peel off |
Alkali resistance 5% NaOH, 240h | No rust, no bubbles, no peel off |
Salt resistance 30g/L,240h | No rust, no bubbles, no peel off |
Salt spray resistance, 1500h | No rust, no bubbles, no peel off |
Oil resistance 0# diesel, crude, 30d | No rust, no bubbles, no peel off |
Water resistance 48H | No bubbles, wrinkling, discoloration or falling off |
(For reference: Pay attention to the influence of ventilation, splash and spillage. Independent immersion testing is recommended if requires other specific data) |
Application environment
Environment temperature | -5~+35℃ |
Relative humidity | ≤85% |
Dew point | ≥3℃ |
Application tips
Brush, roller
Air spray, with air pressure 0.3-0.5Mpa
Airless spray, with spray pressure 15-20Mpa
Recommended dft: 30-60μm
Interval coating time: ≥3h
Application note
◆Agitate part B uniform prior to application
◆Mix well according to the requirements, pour out the same quantity based on the application, and use after mixing evenly.
◆After material pouring, the raw materials in the packaging barrel must be tightly covered to prevent moisture absorption
◆Keep dry and clean during the application, and do not contact with water, alcohol, acid, alkali, etc.
Curing time
Substrate temperature | Surface dry time | Foot traffic | Solid dry |
+10℃ | 2h | 8h | 7d |
+20℃ | 1h | 6h | 5d |
+30℃ | 1h | 4h | 3d |
Note: the curing time varies with the environment condition especially the temperature and relative humidity.
Shelf Life
* storage temperature: 5℃~35℃
* From the manufacturer date and on original package sealed condition:
Part A: 10 months
Part B: 10 months
Packing: Part A 25kg/drum, part B 25g/drum
Make sure the product package sealed well
* store in cool and ventilated place, avoid direct sunshine exposure.
Product health and safety information
For information and advice on the safe handling, storage and disposal of chemical products, users shall refer to the latest Material Safety Data Sheet containing physical, ecological, toxicological and other safety related data.
Integrity declaration
SWD guarantee all technical data stated in this sheet are based on laboratory tests. Actual testing methods may vary due to different circumstances. Therefore please test and verify its applicability. SWD does not take any other responsibilities except the product quality and reserve the right of any modifications on the listed data without prior notice.
Product detail pictures:
Related Product Guide:
Our personnel are generally within the spirit of "continuous improvement and excellence", and using the excellent top quality goods, favorable rate and superior after-sales expert services, we try to win every customer's believe in for High-Quality Aliphatic Examples Products – SWD8030 two component polyaspartic top coating – SWD , The product will supply to all over the world, such as: Malawi, Singapore, Jordan, We follow up the career and aspiration of our elder generation, and we're eager to open up a new prospect in this field, We insist on "Integrity, Profession, Win-win Cooperation", because we have now a strong backup, that are excellent partners with advanced manufacturing lines, abundant technical strength, standard inspection system and good production capacity.
By Clara from Norway - 2017.08.18 18:38
We have been engaged in this industry for many years, we appreciate the work attitude and production capacity of the company, this is a reputable and professional manufacturer.
By Honey from Georgia - 2018.11.11 19:52