High-Quality Aliphatic Polyurethane Clear Coat Products – SWD8030 two component polyaspartic top coating – SWD
High-Quality Aliphatic Polyurethane Clear Coat Products – SWD8030 two component polyaspartic top coating – SWD Detail:
Product features and advantages
* The coating film is tough, dense, full and bright with bright colors
* No discoloration, no yellowing, no pulverization, anti-aging, excellent weather resistance, light and color retention decoration performance
* Excellent adhesive strength, good compatibility with polyurethane, epoxy, chlorinated rubber, alkyd, phenolic and other coatings
*Excellent wear and impact resistance
*Excellent chemical resistance, such as acid, alkali, salt, etc
*Excellent corrosion resistance
*Excellent waterproof performance
*Excellent durability reduces maintenance costs
*Prolong the service life of spraying structure
Application scopes
All kinds of concrete, all kinds of metal structure surface anti-corrosion protection decoration.
Product information
Item | Part A | Part B |
appearance | Light yellow liquid | Color adjustable |
specific gravity (g/m³) | 1.02 | 1.32 |
Viscosity (cps) @25℃ | 230 | 210 |
solid content (%) | 52 | 84 |
Mixing ratio ( by weight) | 1 | 2 |
surface dry time (h) | 1-2 h | |
Coating interval (h) | Min 2h; Max 24 h(20℃) | |
Theoretical coating rate (surface dry film thickness) | 0.10kg/㎡DFT 60μm |
physical properties
Item | Testing standard | results |
Adhesive force | GB/T 6742-2007 | ≥2.5Mpa |
Bending resistance | GB/T 6742-2007 | 1mm |
abrasion resistance(750g/500r) mg | HG/T 3831-2006 | 5 |
impact resistance kg·cm | GB/T 1732 | 50 |
Weather resistance, Artificial accelerated aging,1000h | GB/T14522-1993 | color loss<1, pulverization<1 |
Chemical resistance
Acid resistance 10%H2SO4 or 10%HCI,240h | No rust, no bubbles, no peel off |
Alkali resistance 5% NaOH, 240h | No rust, no bubbles, no peel off |
Salt resistance 30g/L,240h | No rust, no bubbles, no peel off |
Salt spray resistance, 1500h | No rust, no bubbles, no peel off |
Oil resistance 0# diesel, crude, 30d | No rust, no bubbles, no peel off |
Water resistance 48H | No bubbles, wrinkling, discoloration or falling off |
(For reference: Pay attention to the influence of ventilation, splash and spillage. Independent immersion testing is recommended if requires other specific data) |
Application environment
Environment temperature | -5~+35℃ |
Relative humidity | ≤85% |
Dew point | ≥3℃ |
Application tips
Brush, roller
Air spray, with air pressure 0.3-0.5Mpa
Airless spray, with spray pressure 15-20Mpa
Recommended dft: 30-60μm
Interval coating time: ≥3h
Application note
◆Agitate part B uniform prior to application
◆Mix well according to the requirements, pour out the same quantity based on the application, and use after mixing evenly.
◆After material pouring, the raw materials in the packaging barrel must be tightly covered to prevent moisture absorption
◆Keep dry and clean during the application, and do not contact with water, alcohol, acid, alkali, etc.
Curing time
Substrate temperature | Surface dry time | Foot traffic | Solid dry |
+10℃ | 2h | 8h | 7d |
+20℃ | 1h | 6h | 5d |
+30℃ | 1h | 4h | 3d |
Note: the curing time varies with the environment condition especially the temperature and relative humidity.
Shelf Life
* storage temperature: 5℃~35℃
* From the manufacturer date and on original package sealed condition:
Part A: 10 months
Part B: 10 months
Packing: Part A 25kg/drum, part B 25g/drum
Make sure the product package sealed well
* store in cool and ventilated place, avoid direct sunshine exposure.
Product health and safety information
For information and advice on the safe handling, storage and disposal of chemical products, users shall refer to the latest Material Safety Data Sheet containing physical, ecological, toxicological and other safety related data.
Integrity declaration
SWD guarantee all technical data stated in this sheet are based on laboratory tests. Actual testing methods may vary due to different circumstances. Therefore please test and verify its applicability. SWD does not take any other responsibilities except the product quality and reserve the right of any modifications on the listed data without prior notice.
Product detail pictures:
Related Product Guide:
We are ready to share our knowledge of marketing worldwide and recommend you suitable products at most competitive prices. So Profi Tools offer you best value of money and we are ready to develop together with High-Quality Aliphatic Polyurethane Clear Coat Products – SWD8030 two component polyaspartic top coating – SWD , The product will supply to all over the world, such as: India, British, Serbia, Be sure to feel cost-free to send us your specs and we are going to respond for you asap. We have got a experienced engineering team to serve for the every single comprehensive needs. Free samples may be sent for yourself personally to know far more facts. So that you can meet your desires, please actually feel cost-free to contact us. You could send us emails and call us straight. Additionally, we welcome visits to our factory from all over the world for much better recognizing of our corporation. nd merchandise. In our trade with merchants of several countries, we often adhere to the principle of equality and mutual advantage. It is our hope to market, by joint efforts, both trade and friendship to our mutual benefit. We look forward to getting your inquiries.
By Sharon from Russia - 2017.12.02 14:11
A good manufacturers, we have cooperated twice, good quality and good service attitude.
By Meroy from Benin - 2018.11.28 16:25