High-Quality Aliphatic Polyurethane Roof Coating Products –  SWD8030 two component polyaspartic top coating  – SWD

products

High-Quality Aliphatic Polyurethane Roof Coating Products – SWD8030 two component polyaspartic top coating – SWD

short description:


Product Detail

Product Tags

Related Video

Feedback (2)

We're convinced that with joint endeavours, the business between us will bring us mutual benefits. We are able to guarantee you products high quality and competitive value for Paint Marine Red Lead Primer , Polyurea Cartridge , Fire Retardant Polyurethane Foam , First company, we understand each other. Further more company, the trust is getting there. Our enterprise normally at your provider anytime.
High-Quality Aliphatic Polyurethane Roof Coating Products – SWD8030 two component polyaspartic top coating – SWD Detail:

Product features and advantages

* The coating film is tough, dense, full and bright with bright colors

* No discoloration, no yellowing, no pulverization, anti-aging, excellent weather resistance, light and color retention decoration performance

* Excellent adhesive strength, good compatibility with polyurethane, epoxy, chlorinated rubber, alkyd, phenolic and other coatings

*Excellent wear and impact resistance

*Excellent chemical resistance, such as acid, alkali, salt, etc

*Excellent corrosion resistance

*Excellent waterproof performance

*Excellent durability reduces maintenance costs

*Prolong the service life of spraying structure

Application scopes

All kinds of concrete, all kinds of metal structure surface anti-corrosion protection decoration.

Product information

Item Part A Part B
appearance Light yellow liquid Color adjustable
specific gravity (g/m³) 1.02 1.32
Viscosity (cps) @25℃ 230 210
solid content (%) 52 84
Mixing ratio ( by weight) 1 2
surface dry time (h) 1-2 h
Coating interval (h) Min 2h; Max 24 h(20℃)
Theoretical coating rate (surface dry film thickness) 0.10kg/㎡DFT 60μm

physical properties

Item Testing standard results
Adhesive force                        GB/T 6742-2007 ≥2.5Mpa
Bending resistance GB/T 6742-2007 1mm
abrasion resistance(750g/500r) mg HG/T 3831-2006 5
impact resistance  kg·cm                 GB/T 1732 50
Weather resistance, Artificial accelerated aging,1000h GB/T14522-1993 color loss<1, pulverization<1

Chemical resistance

Acid resistance 10%H2SO4 or 10%HCI,240h No rust, no bubbles, no peel off
Alkali resistance 5% NaOH, 240h No rust, no bubbles, no peel off
Salt resistance 30g/L,240h No rust, no bubbles, no peel off
Salt spray resistance, 1500h No rust, no bubbles, no peel off
Oil resistance 0# diesel, crude, 30d No rust, no bubbles, no peel off
Water resistance 48H No bubbles, wrinkling, discoloration or falling off
(For reference: Pay attention to the influence of ventilation, splash and spillage. Independent immersion testing is recommended if requires other specific data)

Application environment

Environment temperature -5~+35℃
Relative humidity ≤85%
Dew point ≥3℃

Application tips

Brush, roller

Air spray, with air pressure 0.3-0.5Mpa

Airless spray, with spray pressure 15-20Mpa

Recommended dft: 30-60μm

Interval coating time: ≥3h

Application note

◆Agitate part B uniform prior to application

◆Mix well according to the requirements, pour out the same quantity based on the application, and use after mixing evenly.

◆After material pouring, the raw materials in the packaging barrel must be tightly covered to prevent moisture absorption

◆Keep dry and clean during the application, and do not contact with water, alcohol, acid, alkali, etc.

Curing time

Substrate temperature Surface dry time Foot traffic Solid dry
+10℃ 2h 8h 7d
+20℃ 1h 6h 5d
+30℃ 1h 4h 3d

Note: the curing time varies with the environment condition especially the temperature and relative humidity.

Shelf Life

* storage temperature: 5℃~35℃

* From the manufacturer date and on original package sealed condition:

Part A: 10 months

Part B: 10 months

Packing: Part A 25kg/drum, part B 25g/drum

Make sure the product package sealed well

* store in cool and ventilated place, avoid direct sunshine exposure.

Product health and safety information

For information and advice on the safe handling, storage and disposal of chemical products, users shall refer to the latest Material Safety Data Sheet containing physical, ecological, toxicological and other safety related data.

Integrity declaration

SWD guarantee all technical data stated in this sheet are based on laboratory tests. Actual testing methods may vary due to different circumstances. Therefore please test and verify its applicability. SWD does not take any other responsibilities except the product quality and reserve the right of any modifications on the listed data without prior notice.


Product detail pictures:

High-Quality Aliphatic Polyurethane Roof Coating Products –  SWD8030 two component polyaspartic top coating  – SWD detail pictures

High-Quality Aliphatic Polyurethane Roof Coating Products –  SWD8030 two component polyaspartic top coating  – SWD detail pictures

High-Quality Aliphatic Polyurethane Roof Coating Products –  SWD8030 two component polyaspartic top coating  – SWD detail pictures


Related Product Guide:

We persist with the principle of "quality 1st, assistance initially, continual improvement and innovation to meet the customers" for your management and "zero defect, zero complaints" as the standard objective. To great our service, we present the products and solutions while using the very good top quality at the reasonable cost for High-Quality Aliphatic Polyurethane Roof Coating Products – SWD8030 two component polyaspartic top coating – SWD , The product will supply to all over the world, such as: Sevilla, Cyprus, Washington, The quality of our merchandise is equal to OEM's quality, because our core parts are the same with OEM supplier. The above items have passed professional certification, and we not only can produce OEM-standard items but we also accept Customized Merchandise order.
  • Adhering to the business principle of mutual benefits, we have a happy and successful transaction, we think we will be the best business partner.
    5 Stars By Eve from Canberra - 2018.11.02 11:11
    This supplier's raw material quality is stable and reliable, has always been in accordance with the requirements of our company to provide the goods that quality meet our requirements.
    5 Stars By Marco from Colombia - 2017.12.19 11:10
    Write your message here and send it to us