High-Quality Heat Cured Polyurea Manufacturers – SWD9513 truck bed liner special polyurea wearable protective coating – SWD

short description:

Product Detail

Product Tags

Feedback (2)

Our intention should be to fulfill our consumers by offering golden provider, superior price and superior quality for Aliphatic Polyurethane Garage Floor , Polyurea Floor Coating , Anticorrosive Paint , First company, we understand each other. Further more company, the trust is getting there. Our enterprise normally at your provider anytime.

High-Quality Heat Cured Polyurea Manufacturers – SWD9513 truck bed liner special polyurea wearable protective coating – SWD Detail:

Product features and advantages

*Solvent free, 100% solid content, safe, environmentally friendly, odor free.

*Rapid cure, can be sprayed forming on any bent surface, on slope and vertical spray to be a model, won’t make sagging.

*Dense coating seamless, good flexibility, high adhesive strength

*Excellent impact resistance, collide and abrasion resistance

*Excellent corrosion resistance and chemical resistance properties, such as acids, alkalis, salts, etc.

*Good shock absorption performance

*Excellent temperature change stability

*Fast cure, so that the construction area quickly revert

*Excellent durability to reduce maintenance costs for life

*Extend the service life of the coating structure

Application scopes

carriage wearable protection of truck, pickup truck, dump truck

Product information

Item	A	B
Appearance	窗体顶端 Pale yellow liquid	Adjustable color
Specific gravity (g/m³)	1.13	1.04
Viscosity（cps）@25℃	650	720
Solid content （%）	100	100
Mixing ratio（volume ratio）	1	1
Gel time(second）@25℃	3-5
Dry time（second）	10-20
Theoretical Coverage (dft)	1.03kg/㎡ film thickness:1mm

Typical physical properties

Acid resistance 10%H₂SO4 or 10%HCI,30d	No rust, no bubbles, no peel off
Alkali resistance 10% NaOH, 30d	No rust, no bubbles, no peel off
Salt resistance 30g/L,30d	No rust, no bubbles, no peel off
Salt spray resistance, 2000h	No rust, no bubbles, no peel off
Oil resistance 0# diesel, crude,30d	No rust, no bubbles, no peel off
(For reference: the above data is acquired based on GB / T9274-1988 test standard. pay attention to the influence of ventilation, splash and spillage. Independent immersion testing is recommended if requires detail data)

Chemical resistance

Environment temperature	0℃-45℃
Product spray heating temperature	65℃-70°C
Pipe heating temperature	55℃-65℃
Relative humidity	≤80%
Dew point	≥3℃

Application environment

Recommend spray machine	GRACO H-XP3 Polyurea spray equipment
Spray gun	Air or machine self-cleaning coatings for spray gun
Static pressure	2300-2500psi
Dynamic pressure	2000-2200psi
Recommend film thickness	1000-3000μm
Recoating interval	≤6h

Product application guide

Recommend spray machine	GRACO H-XP3 Polyurea spray equipment
Spray gun	Fusion-air purge or mechanical purge
Static pressure	2300-2500psi
Dynamic pressure	2000-2200psi
Recommend film thickness	1000-3000μm
Recoating interval	≤6h

Application note

Agitate part B uniform prior to application, thoroughly mix the deposited pigments, or the product’ quality will be affected.

spray polyurea within the proper time if the substrate surface is primed. For the application method and interval time of SWD polyurea speical primer please refer to SWD companies’ other brochure.

Always apply SWD spray polyurea on a small area before large application to check the mix ratio, color and spray effect are correct. For detailed information of application please refer to the latest instruction sheet of the application instructions of SWD spray polyurea series .

Product cure time

Substrate temperature	Dry	Walking intensity	complete solidify
+10℃	18s	45min	7d
+20℃	13s	15min	6d
+30℃	10s	5min	5d

Note: the curing time varies with the environment condition especially the temperature and relative humidity.

Shelf life

* From the manufacturer date and on the original package sealed condition:

Part A: 10 months

Part B: 10 months

*storage temperature：+5-35°C

Packing: Part A 210kg/drum, part B 200kg/drum

Make sure the product package sealed well

* store in cool and ventilated place, avoid direct sunshine exposure.

Product health and safety information

For information and advice on the safe handling, storage and disposal of chemical products, users shall refer to the most recent Material Safety Data Sheet containing physical, ecological, toxicological and other safety related data.

Integrity declaration

SWD guarantee all technical data stated in this sheet are based on laboratory tests. Actual testing methods may vary due to different circumstances. Therefore please test and verify its applicability. SWD does not take any other responsibilities except the product quality and reserve the right of any modifications on the listed data without prior notice.

Product detail pictures:

Related Product Guide:

Always customer-oriented, and it's our ultimate goal to get not only by far the most reputable, trustable and honest supplier, but also the partner for our customers for High-Quality Heat Cured Polyurea Manufacturers – SWD9513 truck bed liner special polyurea wearable protective coating – SWD , The product will supply to all over the world, such as: Moldova, Iraq, Ethiopia, They're durable modeling and promoting effectively all over the world. Under no circumstances disappearing major functions in a quick time, it's a should for you of excellent good quality. Guided by the principle of "Prudence, Efficiency, Union and Innovation. the company make a terrific efforts to expand its international trade, raise its company profit and raise its export scale. We're confident that we are going to possess a vibrant prospect and to be distributed all over the world within the years to come.

Cold Polyurea