High-Quality Paint Marine Red Lead Primer Suppliers – SWD8009 two components sealing penetration concrete special polyurea primer – SWD
High-Quality Paint Marine Red Lead Primer Suppliers – SWD8009 two components sealing penetration concrete special polyurea primer – SWD Detail:
Product features and advantages
* greatly increase the adhesive strength of concrete substrate and coatings
* low viscosity, high fluidity
* excellent sealing and penetration property
* excellent anticorrosion property
* excellent waterproof moisture resistance
* stable resistance to temperature change
* compatible with the following coating film
* avoid bubbles and increase the service life
* high coverage rate to save cost
Application scopes
Substrate surface anticorrosion coating for concrete, marble, ceramic tiles and wood.
Product information
| Item | A component | B component |
| Appearance | light yellow liquid | Color adjustable |
| Specific gravity(g/m³) | 1.02 | 1.05 |
| Viscosity (cps)@25℃ | 220 | 260 |
| Solid content (%) | ＞60% | ＞60% |
| Mix ratio (by weight) | 3 | 2 |
| Surface dry time (h) | 1-3 h | |
| Recoating interval (h) | Min 3 h; max 24h (20℃) | |
| Theoretical coverage (DFT) | 0.09kg/㎡ film thickness 50μm | |
Typical physical properties
| Item | Test standard | Results |
| Tensile strength (dry concrete surface) Mpa | ASTM D-3359 | 3.5 ( or substrate broken) |
| Impact resistance (kg.cm) | GB/T 1732 | 60 |
| Abrasion resistance (750g/500r) mg | GB/T 1732 | 11 |
| Temperature variation (-40+180℃) 24h | GB/9278-1988 | Normal |
| Density g/cm3 | GB/T 6750-2007 | 1.02 |
Chemical resistance
| Acid resistance 40%H2SO4 or 10%HCI,30d | no rust, no bubbles, no peel off |
| Alkali resistance 50%NaOH, 30d | no rust, no bubbles, no peel off |
| Salt resistance 50g/L, 30d | no rust, no bubbles, no peel off |
| Salt spray resistance 1000h | no rust, no bubbles, no peel off |
| Oil resistance, 0# diesel, crude oil, 30d | no rust, no bubbles, no peel off |
| (For reference: Pay attention to the influence of ventilation, splash and spillage. Independent immersion testing is recommended if requires other specific data) | |
Application environment
Environment temperature: -5 ~+ 35℃
Relative humidity: RH%:35-85%
Dew point: ≥3℃
Application guide
Recommend dft: 20-40μm
Recoating interval time: 3-24h
Recommended coating method: brush, roller, airless spray, air spray
Application note
The concrete surface must be completely dry, clean, compact, with no grease or stains, if there has some obvious cracks and breaking area, it should be fixed in advance. Make sure to clean up the surface with air grinding or vacuum method prior to apply SWD8009.
This product can be applied on the temperature under -10℃. When apply on the very low temperature, put the material drums in the air-conditioning room for more than24h.
SWD recommends to agitate the coating uniformly prior to application, use up the mixed materials within 1 hour. Don’t pour the rest liquid to the original bucket.
The viscosity of product is set up in the factory, thinner shall not be random added by the applicators. Call the manufacturer for instructions to add special thinner if the viscosity changed with the application environment and humidity.
Product curing time
| Substrate temperature | Surface dry time | Foo traffic | Solid cure time |
| +10℃ | 3h | 24h | 7d |
| +20℃ | 2h | 12h | 7d |
| +30℃ | 1h | 8h | 7d |
Shelf life
* storage temperature: 5℃-32℃
* shelf life (from the date and production and in sealed condition):
Part A: 12 months
Part B: 12 months
* store in cool and ventilated place, avoid direct sunshine, keep away from heat
* package: part A: 25kg/bucket, part B:25kg/bucket
Product health and safety information
For information and advice on the safe handling, storage and disposal of chemical products, users shall refer to the latest Material Safety Data Sheet containing physical, ecological, toxicological and other safety related data.
Integrity declaration
SWD guarantee all technical data stated in this sheet are based on laboratory tests. Actual testing methods may vary due to different circumstances. Therefore please test and verify its applicability. SWD does not take any other responsibilities except the product quality and reserve the right of any modifications on the listed data without prior notice.
Product detail pictures:
Related Product Guide:
We have the most advanced production equipment, experienced and qualified engineers and workers, recognized quality control systems and a friendly professional sales team pre/after-sales support for High-Quality Paint Marine Red Lead Primer Suppliers – SWD8009 two components sealing penetration concrete special polyurea primer – SWD , The product will supply to all over the world, such as: Austria, Serbia, Slovenia, We have a professional sales team, they have mastered the best technology and manufacturing processes, have years of experience in foreign trade sales, with customers able to communicate seamlessly and accurately understand the real needs of customers, providing customers with personalized service and unique products.
By Gustave from Tanzania - 2018.09.21 11:44
This supplier stick to the principle of "Quality first, Honesty as base", it is absolutely to be trust.
By Jodie from Denmark - 2017.09.22 11:32
