High-Quality Polyurea Piscine Suppliers – SWD9514 Movie props appliance and speaker special polyurea protective coating – SWD
High-Quality Polyurea Piscine Suppliers – SWD9514 Movie props appliance and speaker special polyurea protective coating – SWD Detail:
Product features and advantages
*Solvent free, 100% solid content, safe, environmentally friendly and odor free.
*Rapid cure, can be sprayed forming on any bent, slope and vertical surfaces, no sagging.
*Coating film is compact, dense and flexibility, high adhesive strength with wood and foam substrate.
*Excellent impact resistance, collision resistance and abrasion resistance
*Excellent anticorrosion and chemical resistance to acids, alkali, salts etc.
*Good shock absorbing performance
*Excellent waterproof and moisture proof performance
*Excellent resistance to temperature variation
*Fast cure, application site back to service quickly
*Excellent durability to reduce maintenance cost of service life
*Extend the service life of sprayed structure
Application scopes
Wearable anticorrosion protection of coal chute, spiral separator, flotation tank, washing drum, transmission belt and other mining facilities.
Product information
Item | A | B |
Appearance | Pale yellow liquid | Adjustable color |
Proportion(g/m³) | 1.13 | 1.04 |
Viscosity(cps)@25℃ | 650 | 720 |
Solid content (%) | 100 | 100 |
Mixing ratio(volume ratio) | 1 | 1 |
Gel time(second)@25℃ | 3-5 | |
Dry time(second) | 10-20 | |
Theoretical Coverage(dry film thickness) | 1.03kg/㎡ film thickness:1mm |
Physical properties of products
Items | Test standard | Result |
Hardness (Shore D) | ASTM D-2240 | 47 |
Elongation rate(%) | ASTM D-412 | 150 |
Tensile strength(Mpa) | ASTM D-412 | 20 |
Tear strength (N/km) | ASTM D-624 | 65 |
Impermeability(0.3Mpa/30min) | HG/T 3831-2006 | impermeable |
Wear resistance (750g/500r)/mg | HG/T 3831-2006 | 4.5 |
Adhesive strength(Mpa)concrete base | HG/T 3831-2006 | 3.1 |
Adhesive strength(Mpa) steel base | HG/T 3831-2006 | 11 |
Density(g/cm³) | GB/T 6750-2007 | 1.02 |
Cathodic disbondment [1.5v,(65±5)℃,48h] | HG/T 3831-2006 | ≤15mm |
Product corrosion medium
Acid resistance 10%H2SO4 or 10%HCI,30d | No rust, no bubbles, no peel off |
Alkali resistance 10% NaOH, 30d | No rust, no bubbles, no peel off |
Salt resistance 30g/L,30d | No rust, no bubbles, no peel off |
Salt spray resistance, 2000h | No rust, no bubbles, no peel off |
Oil resistance 0# diesel, crude,30d | No rust, no bubbles, no peel off |
(For reference: the above data is acquired based on GB / T9274-1988 test standard. Pay attention to the influence of ventilation, splash and spillage. Independent immersion testing is recommended if requires other specific data) |
Product application environment
Environment temperature | 0℃-45℃ |
Product spray heating temperature | 65℃-70°C |
Pipe heating temperature | 55℃-65℃ |
Relative humidity | ≤75% |
Dew point | ≥3℃ |
Product application guide
Recommend spray machine | GRACO H-XP3 Polyurea spray equipment |
Spray gun | Air or machine self-cleaning coatings for spray gun |
Static pressure | 2300-2500psi |
Dynamic pressure | 2000-2200psi |
Recommend film thickness | 1000-3000μm |
Recoating interval | ≤6h |
Application note
Agitate part B uniform prior to application, thoroughly mix the deposited pigments, or the product quality will be affected.
spray polyurea within the proper time if the substrate surface is primed. For the application method and interval time of SWD polyurea speical primer please refer to SWD companies’ other brochure.
Always apply SWD spray polyurea on a small area before large application to check the mix ratio, color and spray effect are correct. For detailed information of application please refer to the latest instruction sheet of the application instructions of SWD spray polyurea series.
Product cure time
Substrate temperature | Dry | Foot traffic | Solid dry |
+10℃ | 20s | 45min | 7d |
+20℃ | 15s | 15min | 6d |
+30℃ | 12s | 5min | 5d |
Note: the curing time varies with the environment condition especially the temperature and relative humidity.
Shelf life
*From the manufacturer date and on the original package sealed condition:
A:10 months
B:10 months
*storage temperature:+5-35°C
Packing: Part A 210kg/drum, part B 200kg/drum
Make sure the product package sealed well
* store in cool and ventilated place, avoid direct sunshine exposure.
Product health and safety information
For information and advice on the safe handling, storage and disposal of chemical products, users shall refer to the most recent Material Safety Data Sheet containing physical, ecological, toxicological and other safety related data.
Integrity declaration
SWD guarantee all technical data stated in this sheet are based on laboratory tests. Actual testing methods may vary due to different circumstances. Therefore please test and verify its applicability. SWD does not take any other responsibilities except the product quality and reserve the right of any modifications on the listed data without prior notice.
Product detail pictures:
Related Product Guide:
Our staff are usually in the spirit of "continuous improvement and excellence", and while using the top-quality high-quality items, favorable value and superior after-sales services, we try to acquire each and every customer's belief for High-Quality Polyurea Piscine Suppliers – SWD9514 Movie props appliance and speaker special polyurea protective coating – SWD , The product will supply to all over the world, such as: New Orleans, Egypt, Iraq, Qualified R&D engineer might be there for your consultation service and we will try our best to meet your requirements. So you should feel free to contact us for inquiries. You'll be able to send us emails or call us for small business. Also you are able to come to our business by yourself to get further knowing of us. And we are going to surely present you with the best quotation and after-sale service. We're ready to build stable and friendly relations with our merchants. To achieve mutual success, we'll make our best efforts to build a solid co-operation and transparent communication work with our companions. Above all, we're here to welcome your inquiries for any of our merchandise and service.
By Anna from Thailand - 2018.11.04 10:32
The accounts manager made a detailed introduction about the product, so that we have a comprehensive understanding of the product, and ultimately we decided to cooperate.
By Leona from Portugal - 2017.01.11 17:15