High-Quality Polyurethane Foam Liquid Products – SWD959 moisture cure polyurethane industrial anticorrosion protective coating – SWD

short description:

Product Detail

Product Tags

Feedback (2)

Using a full scientific good quality administration system, very good quality and superior faith, we win good standing and occupied this discipline for Polyurea Waterproof , Polyurea Coating System , Pu Foam , The mission of our firm should be to provide the best high quality goods with finest price tag. We've been on the lookout forward to doing organization with you!

High-Quality Polyurethane Foam Liquid Products – SWD959 moisture cure polyurethane industrial anticorrosion protective coating – SWD Detail:

Features and benefits

* excellent adhesive strength, bond solid with carbon steel, concrete and other substrates.

* coating membrane is dense and flexible, to withstand the damage of cyclic stress failure

* high solid content and meet the requirements of environmentally friendly

*excellent mechanical property, abrasion resistance, impact resistance and scratch resistance

*excellent waterproof

*excellent anticorrosion property and resistance to many chemical rust medium such as salt spray, acid rain.

*excellent anti-aging, no crack and no powder after long term outdoor use.

*hand brushable coating, easy to apply, multiple application method is suitable

*single component, easy application without need of mix ratio with other parts.

Typical use

Anticorrosion waterproof protection in the industrial enterprises of oil, chemistry, transportation, construction, power plant etc.

Product information

Item	Results
Appearance	Color adjustable
Viscosity (cps )@20℃	250
Solid content (%)	≥65
surface dry time (h)	2-4
Pot life (h)	1
theoretical coverage	0.13kg/m²(thickness 100um)

Physical property

Item	Test standard	Results
pencil hardness	GB/T 6739-2006	2H
bending test (cylindrical mandrel) mm	GB/T 6742-1986	1
breakdown resistance strength (kv/mm)	HG/T 3330-1980	250
impact resistance (kg·cm)	GB/T 1732	60
resistance to temperature changes (-40–150℃) 24h	GB/9278-1988	Normal
adhesive strength (Mpa), metal base	ASTM D-3359	5A (highest)
density g/cm³	GB/T 6750-2007	1.03

Chemical resistance

Acid resistance 50% H₂SO₄or15%HCl, 30d	No rust, no bubbles, no peel off
Alkali resistance 50%NaOH, 30d	No rust, no bubbles, no peel off
Salt resistance, 50g/L,30d	No rust, no bubbles, no peel off
Salt spray resistance, 2000h	No rust, no bubbles, no peel off
Oil resistance 0# diesel, crude oil, 30d	No bubbles, no peel off
( For reference: pay attention to the influence of ventilation, splash and spillage. Independent immersion testing is recommended if requires other specific data.)

Application environment

Relative temperature: -5~-+35℃

Relative humidity: RH%:35-85%

Dew point: the temperature of metal surface must have 3℃ than dew point.

Application tips

Recommended dft: 100-200 (as design requirement)

Surface preparation: sand-blasting to above Sa2.5 degree, or polish to St3 class with electric tools.

Re-coating interval: 4-24h, if the interval time exceed 24h or has dust deposited, sand-blasting first and clean well prior to application.

Coating method: airless spray, air spray, brush, roller

Application note

It can be applied in the low temperature below 10℃. Put the coating bucket into the air-conditioning room for over 24 hours when apply in the low temperature environment.

SWD recommends to agitate the coating uniform prior to application, pour accurate quantity of material to another vessel and seal well immediately. Don’t pour the rest liquid to the original bucket.

The viscosity of product is set up in the factory, thinner shall not be random added by the applicators. Call the manufacturer for the instructions of special thinner if the viscosity changed as the application environment and humidity.

Curing time

Substrate temperature	Surface dry time	Foot traffic	Solid dry
+10℃	6h	24h	7d
+20℃	3h	12h	6d
+30℃	2h	8h	5d

Shelf life

* storage temperature: 5℃-32℃

* shelf life: 12 months (sealed)

* store in cool and ventilated place, avoid direct sunshine, keep away from heat

* package: 5kg/bucket, 20kg/bucket, 25kg/bucket

Product health and safety information

For information and advice on the safe handling, storage and disposal of chemical products, users shall refer to the latest Material Safety Data Sheet containing physical, ecological, toxicological and other safety related data.

Integrity declaration

SWD guarantee all technical data stated in this sheet are based on laboratory tests. Actual testing methods may vary due to different circumstances. Therefore please test and verify its applicability. SWD does not take any other responsibilities except the product quality and reserve the right of any modifications on the listed data without prior notice.

Product detail pictures:

Related Product Guide:

We're going to commit ourselves to giving our esteemed buyers using the most enthusiastically considerate solutions for High-Quality Polyurethane Foam Liquid Products – SWD959 moisture cure polyurethane industrial anticorrosion protective coating – SWD , The product will supply to all over the world, such as: Jordan, Panama, Cannes, Due to the stability of our products, timely supply and our sincere service, we are able to sell our products not only over the domestic market, but also exported to countries and regions, including the Middle East, Asia, Europe and other countries and regions. At the same time, we also undertake OEM and ODM orders. We will do our best to serve your company, and establish a successful and friendly cooperation with you.

High Density Polyurethane Foam Liquid