OEM Closed Cell Spray Polyurethane Foam Suppliers – SWD959 moisture cure polyurethane industrial anticorrosion protective coating – SWD
OEM Closed Cell Spray Polyurethane Foam Suppliers – SWD959 moisture cure polyurethane industrial anticorrosion protective coating – SWD Detail:
Features and benefits
* excellent adhesive strength, bond solid with carbon steel, concrete and other substrates.
* coating membrane is dense and flexible, to withstand the damage of cyclic stress failure
* high solid content and meet the requirements of environmentally friendly
*excellent mechanical property, abrasion resistance, impact resistance and scratch resistance
*excellent waterproof
*excellent anticorrosion property and resistance to many chemical rust medium such as salt spray, acid rain.
*excellent anti-aging, no crack and no powder after long term outdoor use.
*hand brushable coating, easy to apply, multiple application method is suitable
*single component, easy application without need of mix ratio with other parts.
Typical use
Anticorrosion waterproof protection in the industrial enterprises of oil, chemistry, transportation, construction, power plant etc.
Product information
| Item | Results |
| Appearance | Color adjustable |
| Viscosity (cps )@20℃ | 250 |
| Solid content (%) | ≥65 |
| surface dry time (h) | 2-4 |
| Pot life (h) | 1 |
| theoretical coverage | 0.13kg/m2(thickness 100um) |
Physical property
| Item | Test standard | Results |
| pencil hardness | GB/T 6739-2006 | 2H |
| bending test (cylindrical mandrel) mm | GB/T 6742-1986 | 1 |
| breakdown resistance strength (kv/mm) | HG/T 3330-1980 | 250 |
| impact resistance (kg·cm) | GB/T 1732 | 60 |
| resistance to temperature changes (-40–150℃) 24h | GB/9278-1988 | Normal |
| adhesive strength (Mpa), metal base | ASTM D-3359 | 5A (highest) |
| density g/cm3 | GB/T 6750-2007 | 1.03 |
Chemical resistance
| Acid resistance 50% H2SO4 or15%HCl, 30d | No rust, no bubbles, no peel off |
| Alkali resistance 50%NaOH, 30d | No rust, no bubbles, no peel off |
| Salt resistance, 50g/L,30d | No rust, no bubbles, no peel off |
| Salt spray resistance, 2000h | No rust, no bubbles, no peel off |
| Oil resistance 0# diesel, crude oil, 30d | No bubbles, no peel off |
| ( For reference: pay attention to the influence of ventilation, splash and spillage. Independent immersion testing is recommended if requires other specific data.) | |
Application environment
Relative temperature: -5~-+35℃
Relative humidity: RH%:35-85%
Dew point: the temperature of metal surface must have 3℃ than dew point.
Application tips
Recommended dft: 100-200 (as design requirement)
Surface preparation: sand-blasting to above Sa2.5 degree, or polish to St3 class with electric tools.
Re-coating interval: 4-24h, if the interval time exceed 24h or has dust deposited, sand-blasting first and clean well prior to application.
Coating method: airless spray, air spray, brush, roller
Application note
It can be applied in the low temperature below 10℃. Put the coating bucket into the air-conditioning room for over 24 hours when apply in the low temperature environment.
SWD recommends to agitate the coating uniform prior to application, pour accurate quantity of material to another vessel and seal well immediately. Don’t pour the rest liquid to the original bucket.
The viscosity of product is set up in the factory, thinner shall not be random added by the applicators. Call the manufacturer for the instructions of special thinner if the viscosity changed as the application environment and humidity.
Curing time
| Substrate temperature | Surface dry time | Foot traffic | Solid dry |
| +10℃ | 6h | 24h | 7d |
| +20℃ | 3h | 12h | 6d |
| +30℃ | 2h | 8h | 5d |
Shelf life
* storage temperature: 5℃-32℃
* shelf life: 12 months (sealed)
* store in cool and ventilated place, avoid direct sunshine, keep away from heat
* package: 5kg/bucket, 20kg/bucket, 25kg/bucket
Product health and safety information
For information and advice on the safe handling, storage and disposal of chemical products, users shall refer to the latest Material Safety Data Sheet containing physical, ecological, toxicological and other safety related data.
Integrity declaration
SWD guarantee all technical data stated in this sheet are based on laboratory tests. Actual testing methods may vary due to different circumstances. Therefore please test and verify its applicability. SWD does not take any other responsibilities except the product quality and reserve the right of any modifications on the listed data without prior notice.
Product detail pictures:
Related Product Guide:
With our leading technology also as our spirit of innovation,mutual cooperation, benefits and development, we are going to build a prosperous future jointly with your esteemed company for OEM Closed Cell Spray Polyurethane Foam Suppliers – SWD959 moisture cure polyurethane industrial anticorrosion protective coating – SWD , The product will supply to all over the world, such as: Gambia, South Korea, Riyadh, To have much more enterprise. ompanions, we've got updated the item list and seek for optimistic co-operation. Our web-site shows the latest and complete information and facts about our goods list and company. For further acknowledge, our consultant service group in Bulgaria will reply to all of the inquiries and complications immediately. They're going to make their finest effort to meet buyers need. Also we support the delivery of absolutely free samples. Business visits to our business in Bulgaria and factory are generally welcome for a win-win negotiation. Hope to expertise a happy company co-operation perform with you.
By Grace from Amsterdam - 2017.05.31 13:26
The sales person is professional and responsible, warm and polite, we had a pleasant conversation and no language barriers on communication.
By Catherine from luzern - 2018.09.08 17:09
