OEM Difference Between Polyurea And Polyaspartic Products –  SWD8028 polyaspartic anticorrosion coating  – SWD

products

OEM Difference Between Polyurea And Polyaspartic Products – SWD8028 polyaspartic anticorrosion coating – SWD

short description:


Product Detail

Product Tags

Related Video

Feedback (2)

We will make just about every exertion for being excellent and perfect, and speed up our actions for standing during the rank of worldwide top-grade and high-tech enterprises for Transparent Spray Paint , One Part Polyurea Garage Floor Coating , Polyurethane Insulation , Welcome any inquiry to our firm. We will be happy to ascertain helpful business enterprise relationships along with you!
OEM Difference Between Polyurea And Polyaspartic Products – SWD8028 polyaspartic anticorrosion coating – SWD Detail:

Features and benefits

* high solids low density, with good leveling, the coating film is tough, dense, full light and bright colors

* excellent adhesive strength, good compatible with polyurethane, epoxy and other coating film.

* high hardness, good scratch resistance and stain resistance

* excellent abrasion resistance, impact resistance

* excellent anticorrosion property, resist to acid, alkali, salt and others.

* no discoloration, UV resistance, no yellowing, no powdering, aging resistance, with excellent weather resistance and gloss and color retention property

* can be applied directly to the surface of metal surface (DTM)

* this product is environmentally friendly and contains no benzene solvents and lead compounds

4

Product information

Item A component B component
Appearance light yellow liquid Color adjustable
Specific gravity(g/m³) 1.04 1.50
Viscosity (cps)@25℃ 40-60 100-200
Solid content (%) 58 90
Mix ratio (by weight) 1 1
Surface dry time (h) 1
Pot life (h)@25℃ 1
Theoretical coverage (DFT) 0.15kg/㎡ film thickness 100μm

Typical physical properties

Item Test standard Results
Pencil hardness H
Adhesive strength(Mpa)metal base HG/T 3831-2006 9.3
Adhesive strength(Mpa)concrete base HG/T 3831-2006 2.8
Impermeability 2.1Mpa
Bending test (cylindrical shaft) ≤1mm
Abrasion resistance (750g/500r) mg HG/T 3831-2006 5
Impact resistance  kg·cm GB/T 1732 50
Anti-aging, accelerated aging 1000h GB/T14522-1993 Loss of light<1, chalking <1

Chemical resistance

Acid resistance 40%H2SO4 or 10%HCI, 240h no rust, no bubbles, no peel off
Alkali resistance 40%NaOH, 240h no rust, no bubbles, no peel off
Salt resistance 60g/L, 240h no rust, no bubbles, no peel off
Salt spray resistance 1000h no rust, no bubbles, no peel off
Oil resistance, engine oil 240h no rust, no bubbles, no peel off
Water resistance, 48h No bubbles, no wrinkled,no color-changing, no peel off
(Note: The above chemical resistant property is obtained according to the GB/T9274-1988 test method, for reference only. Pay attention to the influence of ventilation, splash and spillage. Independent immersion testing is recommended if requires other specific data.)

5

Application instructions

Hand brush, roller

Air spray, with air pressure 0.3-0.5Mpa

Airless spray, with spray pressure 15-20Mpa

Recommend dft: 150-300μm

Recoating interval: min 1h, max 24h

7

Product cure time

Substrate temperature Surface dry time Foot traffic Solid dry time
+10℃ 2h 24h 7d
+20℃ 1.5h 8h 7d
+30℃ 1h 6h 7d

Note: the curing time is different with environment condition especially when temperature and relative humidity changes.

Shelf life

Storage temperature of environment: 5-35℃

* shelf life is from the manufacturing date and sealed condition

Part A: 10 months     Part B: 10 months

* keep the package drum well sealed.

* store in cool and ventilated place, avoid sunshine exposure.

Package: part A: 25kg/barrel, part B: 25kg/barrel.

6


Product detail pictures:

OEM Difference Between Polyurea And Polyaspartic Products –  SWD8028 polyaspartic anticorrosion coating  – SWD detail pictures

OEM Difference Between Polyurea And Polyaspartic Products –  SWD8028 polyaspartic anticorrosion coating  – SWD detail pictures

OEM Difference Between Polyurea And Polyaspartic Products –  SWD8028 polyaspartic anticorrosion coating  – SWD detail pictures

OEM Difference Between Polyurea And Polyaspartic Products –  SWD8028 polyaspartic anticorrosion coating  – SWD detail pictures


Related Product Guide:

It is a good way to improve our products and service. Our mission is to develop creative products to customers with a good experience for OEM Difference Between Polyurea And Polyaspartic Products – SWD8028 polyaspartic anticorrosion coating – SWD , The product will supply to all over the world, such as: Czech republic, Juventus, United Arab Emirates, To achieve reciprocal advantages, our company is widely boosting our tactics of globalization in terms of communication with overseas customers, fast delivery, the best quality and long-term cooperation. Our company upholds the spirit of "innovation, harmony, team work and sharing, trails, pragmatic progress". Give us a chance and we'll prove our capability. With your kind help, we believe that we can create a bright future with you together.
  • We have worked with many companies, but this time is the best,detailed explanation, timely delivery and quality qualified, nice!
    5 Stars By Zoe from Muscat - 2018.12.11 14:13
    We have been engaged in this industry for many years, we appreciate the work attitude and production capacity of the company, this is a reputable and professional manufacturer.
    5 Stars By Candance from Liverpool - 2018.08.12 12:27
    Write your message here and send it to us