OEM Polyaspartic Aliphatic Polyurea Products –  SWD8028 polyaspartic anticorrosion coating  – SWD

products

OEM Polyaspartic Aliphatic Polyurea Products – SWD8028 polyaspartic anticorrosion coating – SWD

short description:


Product Detail

Product Tags

Related Video

Feedback (2)

We have state-of-the-art equipment. Our products are exported for the USA, the UK and so on, enjoying a fantastic status among the clients for Single Part Polyurea Garage Floor , Polyurea Urethane , Aliphatic Meaning , We welcome new and outdated clients from all walks of daily life to get hold of us for long term organization associations and achieving mutual results!
OEM Polyaspartic Aliphatic Polyurea Products – SWD8028 polyaspartic anticorrosion coating – SWD Detail:

Features and benefits

* high solids low density, with good leveling, the coating film is tough, dense, full light and bright colors

* excellent adhesive strength, good compatible with polyurethane, epoxy and other coating film.

* high hardness, good scratch resistance and stain resistance

* excellent abrasion resistance, impact resistance

* excellent anticorrosion property, resist to acid, alkali, salt and others.

* no discoloration, UV resistance, no yellowing, no powdering, aging resistance, with excellent weather resistance and gloss and color retention property

* can be applied directly to the surface of metal surface (DTM)

* this product is environmentally friendly and contains no benzene solvents and lead compounds

4

Product information

Item A component B component
Appearance light yellow liquid Color adjustable
Specific gravity(g/m³) 1.04 1.50
Viscosity (cps)@25℃ 40-60 100-200
Solid content (%) 58 90
Mix ratio (by weight) 1 1
Surface dry time (h) 1
Pot life (h)@25℃ 1
Theoretical coverage (DFT) 0.15kg/㎡ film thickness 100μm

Typical physical properties

Item Test standard Results
Pencil hardness H
Adhesive strength(Mpa)metal base HG/T 3831-2006 9.3
Adhesive strength(Mpa)concrete base HG/T 3831-2006 2.8
Impermeability 2.1Mpa
Bending test (cylindrical shaft) ≤1mm
Abrasion resistance (750g/500r) mg HG/T 3831-2006 5
Impact resistance  kg·cm GB/T 1732 50
Anti-aging, accelerated aging 1000h GB/T14522-1993 Loss of light<1, chalking <1

Chemical resistance

Acid resistance 40%H2SO4 or 10%HCI, 240h no rust, no bubbles, no peel off
Alkali resistance 40%NaOH, 240h no rust, no bubbles, no peel off
Salt resistance 60g/L, 240h no rust, no bubbles, no peel off
Salt spray resistance 1000h no rust, no bubbles, no peel off
Oil resistance, engine oil 240h no rust, no bubbles, no peel off
Water resistance, 48h No bubbles, no wrinkled,no color-changing, no peel off
(Note: The above chemical resistant property is obtained according to the GB/T9274-1988 test method, for reference only. Pay attention to the influence of ventilation, splash and spillage. Independent immersion testing is recommended if requires other specific data.)

5

Application instructions

Hand brush, roller

Air spray, with air pressure 0.3-0.5Mpa

Airless spray, with spray pressure 15-20Mpa

Recommend dft: 150-300μm

Recoating interval: min 1h, max 24h

7

Product cure time

Substrate temperature Surface dry time Foot traffic Solid dry time
+10℃ 2h 24h 7d
+20℃ 1.5h 8h 7d
+30℃ 1h 6h 7d

Note: the curing time is different with environment condition especially when temperature and relative humidity changes.

Shelf life

Storage temperature of environment: 5-35℃

* shelf life is from the manufacturing date and sealed condition

Part A: 10 months     Part B: 10 months

* keep the package drum well sealed.

* store in cool and ventilated place, avoid sunshine exposure.

Package: part A: 25kg/barrel, part B: 25kg/barrel.

6


Product detail pictures:

OEM Polyaspartic Aliphatic Polyurea Products –  SWD8028 polyaspartic anticorrosion coating  – SWD detail pictures

OEM Polyaspartic Aliphatic Polyurea Products –  SWD8028 polyaspartic anticorrosion coating  – SWD detail pictures

OEM Polyaspartic Aliphatic Polyurea Products –  SWD8028 polyaspartic anticorrosion coating  – SWD detail pictures

OEM Polyaspartic Aliphatic Polyurea Products –  SWD8028 polyaspartic anticorrosion coating  – SWD detail pictures


Related Product Guide:

Our well-equipped facilities and excellent quality control throughout all stages of production enables us to guarantee total customer satisfaction for OEM Polyaspartic Aliphatic Polyurea Products – SWD8028 polyaspartic anticorrosion coating – SWD , The product will supply to all over the world, such as: Liverpool, Algeria, Malawi, Our company always concentrate on the development of the international market. We've got a lot of customers in Russia , European countries, the USA, the Middle East countries and Africa countries. We always follow that quality is foundation while service is guarantee to meet all customers.
  • Perfect services, quality products and competitive prices, we have work many times, every time is delighted, wish continue to maintain!
    5 Stars By Queena from Uruguay - 2018.02.04 14:13
    The company has a good reputation in this industry, and finally it tured out that choose them is a good choice.
    5 Stars By Sophia from Cologne - 2017.12.02 14:11
    Write your message here and send it to us