OEM Polyaspartic Polyurea Garage Floor Coating Manufacturers –  SWD8027 polyaspartic abrasion resistance floor coating  – SWD

products

OEM Polyaspartic Polyurea Garage Floor Coating Manufacturers – SWD8027 polyaspartic abrasion resistance floor coating – SWD

short description:


Product Detail

Product Tags

Related Video

Feedback (2)

We have been proud from the higher consumer gratification and wide acceptance due to our persistent pursuit of high quality both on product or service and service for Rust Proof Spray Paint , Plancher Garage Polyurea , Single Component Polyurea , Trust us, you will find a better solution on car parts industry.
OEM Polyaspartic Polyurea Garage Floor Coating Manufacturers – SWD8027 polyaspartic abrasion resistance floor coating – SWD Detail:

Product descriptions

SWD8027 is a two-component material with aliphatic polyaspartic polyurea resin as the main film-forming material, with excellent corrosion resistance, color-change resistance and weather resistance. The product has high solid and low viscosity, good leveling, and meets the requirements of environmental protection; it has excellent workability, can be applied by any application method, and can be cured at low temperature 0 ° C in winter. The coating has excellent flexibility, wear resistance, impact resistance and chemical resistance. It is an ideal weather resistant and environment-friendly floor coating material.

Product application scope

Flooring of city Park Plaza, electronic plant, mechanical factory, chemical plant, pharmaceutical, food and other industrial floors, as well as various outdoor yellowing resistant and wear-resistant floors.

Product information

Item A component B component
Appearance light yellow liquid Color adjustable
Specific gravity(g/m³) 1.05 1.50
Viscosity (cps)@25℃ 40-60 100-200
Solid content (%) 65 88
Mix ratio (by weight) 1 1
Surface dry time (h) 1
Pot life (h)@25℃ 40min
Theoretical coverage (DFT) 0.15kg/㎡ film thickness 100μm

Physical properties

Item Test standard Results
Adhesion force (concrete base) 3Mpa
Pencil hardness 2H
Bending resistance (cylindrical) ≤1mm
Abrasion resistance (750g/500r) mg HG/T 3831-2006 5
Impact resistance  kg·cm GB/T 1732 50
Anti-aging, artificial accelerated aging GB/T14522-1993 Light loss < 1, pulverization < 1

Application instructions

Hand brush, roller

Air spray, with air pressure 0.3-0.5Mpa

Airless spray, with spray pressure 15-20Mpa

Recommend dft: 100-200μm (topcoat)

Recoating interval: min 2h, max 24h.

Application tips

Agitate part B uniform prior to application.

Strictly mix the 2 parts in right ratio and agitate uniform.

Seal the package well after use to avoid moisture absorption.

Keep the application site clean and dry, forbidden to contact with water, alcohols, acids, alkali etc

Product cure time

Substrate temperature Surface dry time Foot traffic Solid dry time
+10℃ 2h 24h 7d
+20℃ 1.5h 8h 7d
+30℃ 1h 6h 7d

Note: the curing time is different with environment condition especially when temperature and relative humidity changes.

Shelf Life

Storage temperature of environment: 5-35℃

* shelf life is from the manufacturing date and sealed condition

Part A: 10 months     Part B: 10 months

* keep the package drum well sealed.

* store in cool and ventilated place, avoid sunshine exposure.

Package: part A: 25kg/barrel, part B: 25kg/barrel.


Product detail pictures:

OEM Polyaspartic Polyurea Garage Floor Coating Manufacturers –  SWD8027 polyaspartic abrasion resistance floor coating  – SWD detail pictures

OEM Polyaspartic Polyurea Garage Floor Coating Manufacturers –  SWD8027 polyaspartic abrasion resistance floor coating  – SWD detail pictures


Related Product Guide:

We persist with the principle of "quality 1st, assistance initially, continual improvement and innovation to meet the customers" for your management and "zero defect, zero complaints" as the standard objective. To great our service, we present the products and solutions while using the very good top quality at the reasonable cost for OEM Polyaspartic Polyurea Garage Floor Coating Manufacturers – SWD8027 polyaspartic abrasion resistance floor coating – SWD , The product will supply to all over the world, such as: Saudi Arabia, San Diego, Ethiopia, We put the product quality and customer's benefits to the first place. Our experienced salesmen supply prompt and efficient service. Quality control group make sure the best quality. We believe quality comes from detail. If you have demand, let us work together to get success.
  • Hope that the company could stick to the enterprise spirit of "Quality, Efficiency, Innovation and Integrity", it will be better and better in the future.
    5 Stars By Joa from Cape Town - 2017.04.08 14:55
    The company can think what our think, the urgency of urgency to act in the interests of our position, can be said this is a responsible company, we had a happy cooperation!
    5 Stars By Sarah from Belarus - 2017.10.27 12:12
    Write your message here and send it to us