OEM Polyurea Flake Floor Products – SWD9512 petrochemical heavy-duty special polyurea anti-corrosion protective coating – SWD
OEM Polyurea Flake Floor Products – SWD9512 petrochemical heavy-duty special polyurea anti-corrosion protective coating – SWD Detail:
Product features and advantages
*Solvent free, 100% solids, safe, environmentally friendly, odor free.
*Rapid cure, can be sprayed forming on any bent, slope and vertical surfaces without sagging.
*Dense coating seamless, good flexibility.
*High adhesive strength, fast bonding well on steel, concrete, wood, glass fibers and other substrates
*Excellent impact resistance, abrasion resistance
*Excellent corrosion resistance and chemical resistance properties, such as acids, alkalis, salts, etc.
*Excellent waterproof performance
*Good shock absorption performance
*Excellent temperature variation resistance stability
*Fast cure, application site back to service quickly
*Excellent durability to reduce lifelong maintenance cost
*Extend service life of the sprayed structure
Application scopes
Petrochemical industry tanks, cofferdam, towers, wash tank, pipelines, sewage ponds and other facilities of corrosion protection.
Product information
Item | A | B |
Appearance | 窗体顶端Pale yellow liquid | Adjustable color |
Specific gravity (g/m³) | 1.13 | 1.04 |
Viscosity(cps)@25℃ | 720 | 570 |
Solid content (%) | 100 | 100 |
Mixing ratio(volume ratio) | 1 | 1 |
Gel time(second)@25℃ | 3-5 | |
Dry time(second) | 10-20 | |
Theoretical Coverage (dft) | 1.08kg/㎡ film thickness:1mm |
Typical physical properties
Items | ASTM D-2240 | 62 |
Hardness (Shore D) | ASTM D-412 | 70 |
Elongation rate (%) | ASTM D-412 | 23 |
Tensile strength (Mpa) | ASTM D-624 | 70 |
Tear strength (N/km) | HG/T 3831-2006 | Impermeable |
Impermeability (0.3Mpa/30min) | HG/T 3831-2006 | 4.5 |
Wear resistance (750g/500r) /mg | HG/T 3831-2006 | 3.3 |
Adhesive strength(Mpa)concrete base | HG/T 3831-2006 | 12 |
Adhesive strength(Mpa) steel base | GB/T 6750-2007 | 1.02 |
Density(g/cm³) | HG/T 3831-2006 | ≤15mm |
Cathodic disbondment [1.5v,(65±5)℃,48h] | ASTM D-2240 | 62 |
Chemical resistance
Environment temperature | 0℃-45℃ |
Product spray heating temperature | 65℃-70°C |
Pipe heating temperature | 55℃-65℃ |
Relative humidity | ≤80% |
Dew point | ≥3℃ |
Product application environment
Recommend spray machine | GRACO H-XP3 Polyurea spray equipment |
Spray gun | Air or machine self-cleaning coatings for spray gun |
Static pressure | 2300-2500psi |
Dynamic pressure | 2000-2200psi |
Recommend film thickness | 1000-3000μm |
Recoating interval | ≤6h |
Product application guide
Recommend spray machine | GRACO H-XP3 Polyurea spray equipment |
Spray gun | Fusion-air purge or mechanical purge |
Static pressure | 2300-2500psi |
Dynamic pressure | 2000-2200psi |
Recommend film thickness | 1000-3000μm |
Recoating interval | ≤6h |
Application note
Agitate part B uniform prior to application, thoroughly mix the deposited pigments, or the product’ quality will be affected.
spray polyurea within the proper time if the substrate surface is primed. For the application method and interval time of SWD polyurea speical primer please refer to SWD companies’ other brochure.
Always apply SWD951 on a small area before large application to check the mix ratio, color and spray effect are correct. For detailed information of application please refer to the latest instruction sheet of the application instructions of SWD spray polyurea series .
Product cure time
Substrate temperature | Dry | Walking intensity | complete solidify |
+10℃ | 18s | 45min | 7d |
+20℃ | 13s | 15min | 6d |
+30℃ | 10s | 5min | 5d |
Note: the curing time varies with the environment condition especially the temperature and relative humidity.
Shelf life
Substrate temperature | Dry | Walking intensity | complete solidify |
+10℃ | 18s | 45min | 7d |
+20℃ | 13s | 15min | 6d |
+30℃ | 10s | 5min | 5d |
Note: the curing time varies with the environment condition especially the temperature and relative humidity.
Product health and safety information
For information and advice on the safe handling, storage and disposal of chemical products, users shall refer to the most recent Material Safety Data Sheet containing physical, ecological, toxicological and other safety related data.
Integrity declaration
SWD guarantee all technical data stated in this sheet are based on laboratory tests. Actual testing methods may vary due to different circumstances. Therefore please test and verify its applicability. SWD does not take any other responsibilities except the product quality and reserve the right of any modifications on the listed data without prior notice.
Product detail pictures:
Related Product Guide:
Our business puts emphasis over the administration, the introduction of talented staff, plus the construction of team building, attempting hard to boost the standard and liability consciousness of personnel customers. Our corporation successfully attained IS9001 Certification and European CE Certification of OEM Polyurea Flake Floor Products – SWD9512 petrochemical heavy-duty special polyurea anti-corrosion protective coating – SWD , The product will supply to all over the world, such as: Ecuador, Southampton, Benin, We aim to build a famous brand which can influence a certain group of people and light up the whole world. We want our staff to realize self-reliance, then achieve financial freedom, lastly obtain time and spiritual freedom. We do not focus on how much fortune we can make, instead we aim to obtain high reputation and be recognized for our goods. As a result, our happiness comes from our clients satisfaction rather than how much money we earn. Ours team will do best for you personally always.
By Elaine from Greek - 2017.06.16 18:23
The company can keep up with the changes in this industry market, product updates fast and the price is cheap, this is our second cooperation, it's good.
By Donna from Portland - 2017.08.18 18:38