OEM Polyurea Foam Coating Suppliers – SWD9513 truck bed liner special polyurea wearable protective coating – SWD
OEM Polyurea Foam Coating Suppliers – SWD9513 truck bed liner special polyurea wearable protective coating – SWD Detail:
Product features and advantages
*Solvent free, 100% solid content, safe, environmentally friendly, odor free.
*Rapid cure, can be sprayed forming on any bent surface, on slope and vertical spray to be a model, won’t make sagging.
*Dense coating seamless, good flexibility, high adhesive strength
*Excellent impact resistance, collide and abrasion resistance
*Excellent corrosion resistance and chemical resistance properties, such as acids, alkalis, salts, etc.
*Good shock absorption performance
*Excellent temperature change stability
*Fast cure, so that the construction area quickly revert
*Excellent durability to reduce maintenance costs for life
*Extend the service life of the coating structure
Application scopes
carriage wearable protection of truck, pickup truck, dump truck
Product information
Item | A | B
|
Appearance | 窗体顶端
Pale yellow liquid |
Adjustable color |
Specific gravity (g/m³) | 1.13 | 1.04 |
Viscosity(cps)@25℃ | 650 | 720 |
Solid content (%) | 100 | 100 |
Mixing ratio(volume ratio) | 1 | 1 |
Gel time(second)@25℃ | 3-5 | |
Dry time(second) | 10-20 | |
Theoretical Coverage (dft) | 1.03kg/㎡ film thickness:1mm |
Typical physical properties
Acid resistance 10%H2SO4 or 10%HCI,30d | No rust, no bubbles, no peel off |
Alkali resistance 10% NaOH, 30d | No rust, no bubbles, no peel off |
Salt resistance 30g/L,30d | No rust, no bubbles, no peel off |
Salt spray resistance, 2000h | No rust, no bubbles, no peel off |
Oil resistance 0# diesel, crude,30d | No rust, no bubbles, no peel off |
(For reference: the above data is acquired based on GB / T9274-1988 test standard. pay attention to the influence of ventilation, splash and spillage. Independent immersion testing is recommended if requires detail data) |
Chemical resistance
Environment temperature | 0℃-45℃ |
Product spray heating temperature | 65℃-70°C |
Pipe heating temperature | 55℃-65℃ |
Relative humidity | ≤80% |
Dew point | ≥3℃ |
Application environment
Recommend spray machine | GRACO H-XP3 Polyurea spray equipment |
Spray gun | Air or machine self-cleaning coatings for spray gun |
Static pressure | 2300-2500psi |
Dynamic pressure | 2000-2200psi |
Recommend film thickness | 1000-3000μm |
Recoating interval | ≤6h |
Product application guide
Recommend spray machine | GRACO H-XP3 Polyurea spray equipment |
Spray gun | Fusion-air purge or mechanical purge |
Static pressure | 2300-2500psi |
Dynamic pressure | 2000-2200psi |
Recommend film thickness | 1000-3000μm |
Recoating interval | ≤6h |
Application note
Agitate part B uniform prior to application, thoroughly mix the deposited pigments, or the product’ quality will be affected.
spray polyurea within the proper time if the substrate surface is primed. For the application method and interval time of SWD polyurea speical primer please refer to SWD companies’ other brochure.
Always apply SWD spray polyurea on a small area before large application to check the mix ratio, color and spray effect are correct. For detailed information of application please refer to the latest instruction sheet of the application instructions of SWD spray polyurea series .
Product cure time
Substrate temperature | Dry | Walking intensity | complete solidify |
+10℃ | 18s | 45min | 7d |
+20℃ | 13s | 15min | 6d |
+30℃ | 10s | 5min | 5d |
Note: the curing time varies with the environment condition especially the temperature and relative humidity.
Shelf life
* From the manufacturer date and on the original package sealed condition:
Part A: 10 months
Part B: 10 months
*storage temperature:+5-35°C
Packing: Part A 210kg/drum, part B 200kg/drum
Make sure the product package sealed well
* store in cool and ventilated place, avoid direct sunshine exposure.
Product health and safety information
For information and advice on the safe handling, storage and disposal of chemical products, users shall refer to the most recent Material Safety Data Sheet containing physical, ecological, toxicological and other safety related data.
Integrity declaration
SWD guarantee all technical data stated in this sheet are based on laboratory tests. Actual testing methods may vary due to different circumstances. Therefore please test and verify its applicability. SWD does not take any other responsibilities except the product quality and reserve the right of any modifications on the listed data without prior notice.
Product detail pictures:
Related Product Guide:
We thinks what customers think, the urgency of urgency to act in the interests of a customer position of principle, allowing for better quality, lower processing costs, prices are more reasonable, won the new and old customers the support and affirmation for OEM Polyurea Foam Coating Suppliers – SWD9513 truck bed liner special polyurea wearable protective coating – SWD , The product will supply to all over the world, such as: Honduras, Berlin, Philippines, Make sure you genuinely feel free to send us your requirements and we are going to respond for you asap. We now have got a skilled engineering group to serve for your just about every detailed needs. Cost-free samples could be sent to suit your needs personally to understand much more information. In an effort to meet your requires, be sure to seriously feel free to make contact with us. You may send us emails and contact us directly. Moreover, we welcome visits to our factory from around the globe for much better recognizing of our organization. nd objects. In our trade with merchants of numerous countries, we usually adhere for the principle of equality and mutual benefit. It is really our hope to market, by joint efforts, each trade and friendship to our mutual advantage. We look forward to getting your inquiries.
By Chris Fountas from Southampton - 2017.07.07 13:00
The product classification is very detailed that can be very accurate to meet our demand, a professional wholesaler.
By Claire from Jakarta - 2018.10.09 19:07