OEM Primers Manufacturers – SWD168L polyurea special hole-sealing putty – SWD
OEM Primers Manufacturers – SWD168L polyurea special hole-sealing putty – SWD Detail:
Product features and advantages
*The coating is seamless, tough and compact
*Strong adhesion, excellent impact resistance, collision resistance and wear resistance
*Excellent anti-corrosion and chemical resistance, such as acid, alkali, salt, etc
Application scopes
It is suitable for leveling, joint filling and hole sealing of metal base, concrete and cement mortar plastering.
Product information
Item | Results |
Appearance | Flat and bubble free |
Solid content (%) | ≥90(liquid, no quartz sand added) |
pot life h (25℃) | 1 |
Surface dry time (h) | ≤3 |
Mixing ratio | A:B=1:1, liquid: quartz sand=1:1-2 |
Solid dry time(h) | ≤12 |
Theoretical coverage (dft) | 0.7kg/m2( thickness 1000 um) |
Physical properties
Item | Result |
Adhesive strength | Concrete base: ≥4.0Mpa (or substrate failure)
Steel base: ≥8Mpa |
Impact resistance (kg·cm) | 50 |
Salt water resistance, 360h | No rust, no bubbles, no peel off |
Acid resistance (5%H2SO4,168h) | No rust, no bubbles, no peel off |
Temperature variation resistance (-40—+120℃) | Unchanged |
Application environment
Environment temperature: 5-38℃
Relative humidity: 35-85%
The concrete surface should be PH<10, the substrate water content less than 10%
Dew point ≥3℃
Application tips
Recommended dft: 1000 um
Interval time: min 3h, max 168h, if the maximum interval time is exceeded or there is dust on the surface, it is recommended to use sandpaper to polish and clean before application.
Coating method: scraping
Application note
To ensure the surface is perfect and clean, remove the oil, mold, dust and other attached dirt on the surface, also remove the loose part to make sure it is solid and dry.
Mix the paint evenly before use, pour out the amount to use up, and close the lid immediately. The mixed paint must be used up within 60 minutes. Do not return the remaining products to the original paint barrel.
Mix part A and part B in right ratio, then mix with quartz sand or quartz powder together for use.
Do not add organic solvents or other coatings.
Curing time
Substrate temperature | Surface dry time | Foot traffic | Solid dry |
+10℃ | 6h | 24h | 7d |
+20℃ | 4h | 12h | 7d |
+30℃ | 2h | 6h | 7d |
Product cure time
Substrate temperature | Surface dry time | Foot traffic | Solid dry time |
+10℃ | 2h | 24h | 7d |
+20℃ | 1.5h | 8h | 7d |
+30℃ | 1h | 6h | 7d |
Note: the curing time is different with environment condition especially when temperature and relative humidity changes.
Shelf life
* storage temperature: 5℃-32℃
* shelf life: 12 months (sealed)
* store in cool and ventilated place, avoid direct sunshine, keep away from heat
* package: 20kg/bucket
Product health and safety information
For information and advice on the safe handling, storage and disposal of chemical products, users shall refer to the latest Material Safety Data Sheet containing physical, ecological, toxicological and other safety related data.
Integrity declaration
SWD guarantee all technical data stated in this sheet are based on laboratory tests. Actual testing methods may vary due to different circumstances. Therefore please test and verify its applicability. SWD does not take any other responsibilities except the product quality and reserve the right of any modifications on the listed data without prior notice.
Product detail pictures:
Related Product Guide:
We strive for excellence, service the customers", hopes to become the best cooperation team and dominator enterprise for personnel, suppliers and customers, realizes value share and continuous promotion for OEM Primers Manufacturers – SWD168L polyurea special hole-sealing putty – SWD , The product will supply to all over the world, such as: Wellington, Holland, Austria, Our market share of our products and solutions has greatly increased yearly. If you are interested in any of our products or would like to discuss a custom order, make sure you feel free to contact us. We've been looking forward to forming successful business relationships with new clients around the world in the near future. We've been looking forward to your inquiry and order.
By Andrew Forrest from Greenland - 2018.10.09 19:07
We are a small company that has just started, but we get the company leader's attention and gave us a lot of help. Hope we can make progress together!
By Jason from Nigeria - 2018.06.26 19:27