OEM Roof Foam Spray Products – SWD250 Spray Rigid Polyurethane Foam Building walls heat insulation material – SWD
OEM Roof Foam Spray Products – SWD250 Spray Rigid Polyurethane Foam Building walls heat insulation material – SWD Detail:
Characteristics
SWD250 external wall rigid polyurethane foam is a new energy efficient insulation material which is instant sprayed-forming by A & B liquid under high pressure of spray gun. The liquid material has good fluidity and permeability under high pressure that be able to keep foaming inside the wall and firmly bond with the base to seal gaps. The adhesive strength(≥40Kpa) bonded with the base surpasses the tear strength of the rigid foam self, it will not peel off even the substrate occurs expansion and contraction. This product is acid and alkali resistant, solvent resistant and anti-aging, the service life is over 50 years which is fit for the service cycle of the building exterior walls and resolved all the problems of traditional materials’ frequent maintenance from water absorption, moisture absorption and leaking. SWD250 is environment-friendly safe applied with newly Eco friendly foaming agent that is solvent free, no volatile and no pollution in production and application process.
Specifications
Density | ≥35kg/㎥ |
compressive strength | ≥0.2Mpa |
heat conductivity coefficient | ≤0.022W/(m.k) |
Water absorption rate v/v | ≤2% |
Dimensional stability(70℃ 48h) | ≤1% |
Closed-cell rate | ≥95% |
combustion performance | B2 class |
The heat insulation effect fully meets and better than the requirements of heating residential parts in JGJ26-89 residential building energy efficient design standard. The fire retardant performance complies with GBJ16 Building Design Fire retardant code.
Recommended procedures
No. | Performance process |
1 | leveling the exterior wall substrate |
2 | clear up the exterior wall with no dust and Debris |
3 | brush the coating slurry |
4 | spray polyurethane rigid foam per instruction. |
5 | stick on the mesh cloth |
6 | use anti-crack putty to flat the surface |
7 | brush coatings or stick tiles. |
Typical physical properties
Item | Test standard | Results |
Pencil hardness | H | |
Adhesive strength(Mpa)metal base | HG/T 3831-2006 | 9.3 |
Adhesive strength(Mpa)concrete base | HG/T 3831-2006 | 2.8 |
Impermeability | 2.1Mpa | |
Bending test (cylindrical shaft) | ≤1mm | |
Abrasion resistance (750g/500r) mg | HG/T 3831-2006 | 5 |
Impact resistance kg·cm | GB/T 1732 | 50 |
Anti-aging, accelerated aging 1000h | GB/T14522-1993 | Loss of light<1, chalking <1 |
Application scope
heat insulation of building walls and roof
Shelf life
10 months (indoor with dry and cool conditions)
Packing
A component 250kg/bucket; B component 200kg/bucket.
Production places
Minhang Shanghai City, and Nantong coastal industrial park production base in Jiangsu (5% of the raw materials imported from SWD US, 60% from multinational company in Shanghai, 35% from local support)
Security
To apply this product must be accordance with the relevant national regulation of sanitation, safety and environment protection. Do not even contact the surface of wet coating.
Global applicability
Our company aims to provide worldwide customers with standard coating products, however custom adjustments can be made to adapt and leverage different regional conditions and international norms. In this case, additional alternative product data will be provided.
Integrity declaration
Our company guarantees the reality of the listed data. Due to the diversity and variability of the application environment, please test and verify it before use. We don’t take any other responsibilities except the coating quality self and reserve the right of modifying the listed data without prior notice.
Product detail pictures:
Related Product Guide:
Our development depends on the advanced equipment ,excellent talents and continuously strengthened technology forces for OEM Roof Foam Spray Products – SWD250 Spray Rigid Polyurethane Foam Building walls heat insulation material – SWD , The product will supply to all over the world, such as: Orlando, Accra, Salt Lake City, Our stock have valued 8 million dollar , you can find the competitive parts within short delivery time. Our company is not only your partner in business, but also our company is your assistant in the coming corporation.
By Adam from Slovakia - 2018.11.22 12:28
Timely delivery, strict implementation of the contract provisions of the goods, encountered special circumstances, but also actively cooperate, a trustworthy company!
By Naomi from Czech republic - 2018.09.12 17:18