SWD8008 two component cathodic disbonding metal

products

SWD8008 two component cathodic disbonding metal

short description:

SWD8008 two component cathodic disbonding metal special polyurea primer takes polyurea polyurethane resin and polymers as main material, refined with special formulation and scientific production process. The coating film is dense, tough, with high infiltration and shielding performance, excellent cathodic disbonding performance and anti-rust, anticorrosion waterproof properties. The coating film has high adhesive strength with metal substrate and be compatible with the following coating film.


Product Detail

Product Tags

Product features and advantages

* greatly increase the adhesive strength with metal substrate

* excellent anticorrosion and wear resistance

* excellent cathodic disbonding resistance

* excellent waterproof & moisture resistance

* stable resistance to temperature change

* compatible with the following coating film

* avoid rust and corrosion and increase the service life

* high coverage rate to save cost

Application scopes

Anticorrosion coating for any metal structures, stainless steel, aluminum surface. Low surface treatment with rust on metal structure.

Product information

Item A component B component
Appearance light yellow liquid color adjustable
Specific gravity(g/m³) 1.03 1.25
Viscosity (cps)@25℃ 210 380
Solid content (%) >65% >65%
Mix ratio (by weight) 1 1
Surface dry time (h) 1-3h
Recoating interval (h) Min 3 h; max 24h (20℃)
Theoretical coverage (DFT) 0.12kg/㎡ film thickness 50μm

Typical physical properties

Item Test standard Results
Tensile strength (dry metal surface) Mpa ASTM D-3359 11.5 ( or substrate broken)
Impact resistance (kg.cm) GB/T 1732 60
Abrasion resistance (750g/500r) mg GB/T 1732 11
Temperature variation resistance (-40+180℃) 24h                 GB/9278-1988 Normal
Cathodic disbonding resistance [1.5v,(65±5)℃, 48h] HG/T 3831-2006 ≤15mm
Density g/cm3 GB/T 6750-2007 1.08

Chemical resistance

Acid resistance 50%H2SO4 or 15%HCI,30d no rust, no bubbles, no peel off
Alkali resistance 50%NaOH, 30d no rust, no bubbles, no peel off
Salt resistance 60g/L, 30d no rust, no bubbles, no peel off
Salt spray resistance 1000h no rust, no bubbles, no peel off
Oil resistance, 0# diesel, crude oil, 30d no rust, no bubbles, no peel off
(For reference: Pay attention to the influence of ventilation, splash and spillage. Independent immersion testing is recommended if requires other specific data)

  • Previous:
  • Next:

  • Write your message here and send it to us