SWD9526 single component thick film polyurea  – SWD

products

SWD9526 single component thick film polyurea – SWD

short description:


Product Detail

Product Tags

Related Video

Feedback (2)

While in the past few years, our organization absorbed and digested innovative technologies both equally at home and abroad. Meanwhile, our organization staffs a group of experts devoted for the advancement of Polyurea Foam Coating , Polyurea Floor Coating System , Diy Polyurea Spray , To acquire a consistent, profitable, and constant growth by getting a competitive advantage, and by continuously increasing the value added to our shareholders and our employee.
SWD9526 single component thick film polyurea – SWD Detail:

Product features and advantages

* high solid content, low VOC

* easy application method, use scraper to scratch the coat. Special polyurea spray machine is not needed, one hand thick film

* excellent wearable, impact resistance, resistance to scratch

* excellent waterproofing

* excellent resistance to chemical media, can withstand certain concentration of acid, alkali, oil, salt and organic solvent

* excellent adhesive strength, fast bond to the surface of steel, concrete, wood, fiberglass and other substrate.

* wide application temperature, can be applied on -50℃~120℃

*single component material, easy to apply that reduce the labor cost.

Application scopes

Waterproof of construction, water conservancy, transportation, chemical and power plants, such as the crack repair of highway, pavement, airport runway, leak repair of water conservancy, offshore dam and port dock repair etc.

Product information

Item Results
Appearance Color is adjustable
Specific gravity (g/cm3) 1.1
Viscosity (cps )@20℃ 5000
Solid content (%) ≥80
surface dry time (hrs) 1-3
Pot life (hrs) 0.5h
theoretical coverage 0.59kg/m2(thickness 500um)

Physical properties

Item Test standard results
Hardness (Shore A) ASTM D-2240 88
Elongation (%) ASTM D-412 >310
tensile strength (Mpa) ASTM D-412 20
Tear strength (kN/m) ASTM D-624 68
abrasion resistance(750g/500r),mg HG/T 3831-2006 5
Adhesive strength (Mpa) steel base HG/T 3831-2006 10
Adhesive strength (Mpa) concrete base HG/T 3831-2006 3.3
impact resistance (kg.m) GB/T23446-2009 1.0
Density (g/cm3) GB/T 6750-2007 1.1

Chemical resistance

Acid resistance 30%H2SO4 or10%HCl,30d no rust, no bubbles, no peel off
Alkali resistance 30%NaOH, 30d no rust, no bubbles, no peel off
Salt resistance 30g/L,30d no rust, no bubbles, no peel off
Salt spray resistance, 2000h no rust, no bubbles, no peel off
Oil resistance no bubbles, no peel off
0# diesel, crude oil, 30d no rust, no bubbles, no peel off
(For reference: pay attention to the influence of ventilation, splash and spillage. Independent immersion testing is recommended if requiring detail data.)

Application instructions

Environment temperature: -5 ~35℃

Relative humidity: 35-85%

Dew point: when apply on metal surface, the temperature must be 3℃ higher than dew point.

Application guidance

Recommended dft: 500-1000um (or based on the design requirements)

Recoat interval: 2-4h, if exceed 24h or have dusts on the surface, use sandpaper to blasting then apply it.

Recommended application method: use scraper to scratch.

Notice

It can be used in the temperature below 10℃. When apply in extreme low temperature, keep the coating barrel in the air conditioning room for 24 hrs.

SWD advises to mix the coating barrel uniform, seal the package well after use to avoid moisture absorption. Not to put the poured out material into the original barrel again.

Viscosity is fixed before shipped, thinner shall not be random added. Instruct the manufacturer in special situation to add thinner.

Curing time

Substrate temperature Surface dry time Foot traffic Solid cure
+10℃ 4h 24h 7d
+20℃ 1.5h 8h 6d
+30℃ 1h 6h 5d

Shelf life

Storage temperature of environment: 5-35℃

* shelf life: 6 months (sealed)

* store in cool and ventilated place, avoid sunshine direct exposure, keep away from heat.

* Package: 4kg/barrel, 20kg/barrel.


Product detail pictures:

SWD9526 single component thick film polyurea  – SWD detail pictures

SWD9526 single component thick film polyurea  – SWD detail pictures

SWD9526 single component thick film polyurea  – SWD detail pictures

SWD9526 single component thick film polyurea  – SWD detail pictures


Related Product Guide:

Fast and good quotations, informed advisers to help you choose the correct product that suits all your needs, a short production time, responsible quality control and different services for paying and shipping affairs for SWD9526 single component thick film polyurea – SWD , The product will supply to all over the world, such as: Nairobi, Frankfurt, Berlin, Why we can do these? Because: A, We are honest and reliable. Our products have high quality, attractive price, sufficient supply capacity and perfect service. B, Our geographical position has a big advantage . C, Various types: Welcome your inquiry, It will be highly appreciated.
  • The product manager is a very hot and professional person, we have a pleasant conversation, and finally we reached a consensus agreement.
    5 Stars By Martina from Roman - 2017.09.26 12:12
    In general, we are satisfied with all aspects, cheap, high-quality, fast delivery and good procuct style, we will have follow-up cooperation!
    5 Stars By Myrna from Ethiopia - 2018.12.05 13:53
    Write your message here and send it to us