Wholesale China Paint Marine Red Lead Primer Manufacturers – SWD8008 two component cathodic disbonding metal – SWD
Wholesale China Paint Marine Red Lead Primer Manufacturers – SWD8008 two component cathodic disbonding metal – SWD Detail:
Product features and advantages
* greatly increase the adhesive strength with metal substrate
* excellent anticorrosion and wear resistance
* excellent cathodic disbonding resistance
* excellent waterproof & moisture resistance
* stable resistance to temperature change
* compatible with the following coating film
* avoid rust and corrosion and increase the service life
* high coverage rate to save cost
Application scopes
Anticorrosion coating for any metal structures, stainless steel, aluminum surface. Low surface treatment with rust on metal structure.
Product information
| Item | A component | B component |
| Appearance | light yellow liquid | color adjustable |
| Specific gravity(g/m³) | 1.03 | 1.25 |
| Viscosity (cps)@25℃ | 210 | 380 |
| Solid content (%) | ＞65% | ＞65% |
| Mix ratio (by weight) | 1 | 1 |
| Surface dry time (h) | 1-3h | |
| Recoating interval (h) | Min 3 h; max 24h (20℃) | |
| Theoretical coverage (DFT) | 0.12kg/㎡ film thickness 50μm | |
Typical physical properties
| Item | Test standard | Results |
| Tensile strength (dry metal surface) Mpa | ASTM D-3359 | 11.5 ( or substrate broken) |
| Impact resistance (kg.cm) | GB/T 1732 | 60 |
| Abrasion resistance (750g/500r) mg | GB/T 1732 | 11 |
| Temperature variation resistance (-40+180℃) 24h | GB/9278-1988 | Normal |
| Cathodic disbonding resistance [1.5v,(65±5)℃, 48h] | HG/T 3831-2006 | ≤15mm |
| Density g/cm3 | GB/T 6750-2007 | 1.08 |
Chemical resistance
| Acid resistance 50%H2SO4 or 15%HCI,30d | no rust, no bubbles, no peel off |
| Alkali resistance 50%NaOH, 30d | no rust, no bubbles, no peel off |
| Salt resistance 60g/L, 30d | no rust, no bubbles, no peel off |
| Salt spray resistance 1000h | no rust, no bubbles, no peel off |
| Oil resistance, 0# diesel, crude oil, 30d | no rust, no bubbles, no peel off |
| (For reference: Pay attention to the influence of ventilation, splash and spillage. Independent immersion testing is recommended if requires other specific data) | |
Product detail pictures:
Related Product Guide:
Our enterprise since its inception, often regards solution excellent as enterprise life, continually strengthen output technology, enhance product high quality and continually strengthen organization total high-quality administration, in strict accordance using the national standard ISO 9001:2000 for Wholesale China Paint Marine Red Lead Primer Manufacturers – SWD8008 two component cathodic disbonding metal – SWD , The product will supply to all over the world, such as: Swedish, Portugal, Doha, If you are for any reason unsure which product to select, do not hesitate to contact us and we are going to be delighted to advise and assist you. This way we are going to be providing you with all the knowledge needed to make the best choice. Our company strictly follows "Survive by good quality, Develop by keeping good credit. " operation policy. Welcome all the clients old and new to visit our company and talk about the business. We have been looking for more and more customers to create the glorious future.
By Judy from Japan - 2017.12.09 14:01
The customer service staff's answer is very meticulous, the most important is that the product quality is very good, and packaged carefully, shipped quickly!
By Christopher Mabey from Mozambique - 2017.11.29 11:09
Write your message here and send it to us
