Wholesale China Polyurea Base Coat Suppliers – SWD9514 Movie props appliance and speaker special polyurea protective coating – SWD
Wholesale China Polyurea Base Coat Suppliers – SWD9514 Movie props appliance and speaker special polyurea protective coating – SWD Detail:
Product features and advantages
*Solvent free, 100% solid content, safe, environmentally friendly and odor free.
*Rapid cure, can be sprayed forming on any bent, slope and vertical surfaces, no sagging.
*Coating film is compact, dense and flexibility, high adhesive strength with wood and foam substrate.
*Excellent impact resistance, collision resistance and abrasion resistance
*Excellent anticorrosion and chemical resistance to acids, alkali, salts etc.
*Good shock absorbing performance
*Excellent waterproof and moisture proof performance
*Excellent resistance to temperature variation
*Fast cure, application site back to service quickly
*Excellent durability to reduce maintenance cost of service life
*Extend the service life of sprayed structure
Application scopes
Wearable anticorrosion protection of coal chute, spiral separator, flotation tank, washing drum, transmission belt and other mining facilities.
Product information
Item | A | B |
Appearance | Pale yellow liquid | Adjustable color |
Proportion(g/m³) | 1.13 | 1.04 |
Viscosity(cps)@25℃ | 650 | 720 |
Solid content (%) | 100 | 100 |
Mixing ratio(volume ratio) | 1 | 1 |
Gel time(second)@25℃ | 3-5 | |
Dry time(second) | 10-20 | |
Theoretical Coverage(dry film thickness) | 1.03kg/㎡ film thickness:1mm |
Physical properties of products
Items | Test standard | Result |
Hardness (Shore D) | ASTM D-2240 | 47 |
Elongation rate(%) | ASTM D-412 | 150 |
Tensile strength(Mpa) | ASTM D-412 | 20 |
Tear strength (N/km) | ASTM D-624 | 65 |
Impermeability(0.3Mpa/30min) | HG/T 3831-2006 | impermeable |
Wear resistance (750g/500r)/mg | HG/T 3831-2006 | 4.5 |
Adhesive strength(Mpa)concrete base | HG/T 3831-2006 | 3.1 |
Adhesive strength(Mpa) steel base | HG/T 3831-2006 | 11 |
Density(g/cm³) | GB/T 6750-2007 | 1.02 |
Cathodic disbondment [1.5v,(65±5)℃,48h] | HG/T 3831-2006 | ≤15mm |
Product corrosion medium
Acid resistance 10%H2SO4 or 10%HCI,30d | No rust, no bubbles, no peel off |
Alkali resistance 10% NaOH, 30d | No rust, no bubbles, no peel off |
Salt resistance 30g/L,30d | No rust, no bubbles, no peel off |
Salt spray resistance, 2000h | No rust, no bubbles, no peel off |
Oil resistance 0# diesel, crude,30d | No rust, no bubbles, no peel off |
(For reference: the above data is acquired based on GB / T9274-1988 test standard. Pay attention to the influence of ventilation, splash and spillage. Independent immersion testing is recommended if requires other specific data) |
Product application environment
Environment temperature | 0℃-45℃ |
Product spray heating temperature | 65℃-70°C |
Pipe heating temperature | 55℃-65℃ |
Relative humidity | ≤75% |
Dew point | ≥3℃ |
Product application guide
Recommend spray machine | GRACO H-XP3 Polyurea spray equipment |
Spray gun | Air or machine self-cleaning coatings for spray gun |
Static pressure | 2300-2500psi |
Dynamic pressure | 2000-2200psi |
Recommend film thickness | 1000-3000μm |
Recoating interval | ≤6h |
Application note
Agitate part B uniform prior to application, thoroughly mix the deposited pigments, or the product quality will be affected.
spray polyurea within the proper time if the substrate surface is primed. For the application method and interval time of SWD polyurea speical primer please refer to SWD companies’ other brochure.
Always apply SWD spray polyurea on a small area before large application to check the mix ratio, color and spray effect are correct. For detailed information of application please refer to the latest instruction sheet of the application instructions of SWD spray polyurea series.
Product cure time
Substrate temperature | Dry | Foot traffic | Solid dry |
+10℃ | 20s | 45min | 7d |
+20℃ | 15s | 15min | 6d |
+30℃ | 12s | 5min | 5d |
Note: the curing time varies with the environment condition especially the temperature and relative humidity.
Shelf life
*From the manufacturer date and on the original package sealed condition:
A:10 months
B:10 months
*storage temperature:+5-35°C
Packing: Part A 210kg/drum, part B 200kg/drum
Make sure the product package sealed well
* store in cool and ventilated place, avoid direct sunshine exposure.
Product health and safety information
For information and advice on the safe handling, storage and disposal of chemical products, users shall refer to the most recent Material Safety Data Sheet containing physical, ecological, toxicological and other safety related data.
Integrity declaration
SWD guarantee all technical data stated in this sheet are based on laboratory tests. Actual testing methods may vary due to different circumstances. Therefore please test and verify its applicability. SWD does not take any other responsibilities except the product quality and reserve the right of any modifications on the listed data without prior notice.
Product detail pictures:
Related Product Guide:
Sticking for the perception of "Creating products of top quality and producing friends with people today from all around the world", we constantly place the desire of shoppers to start with for Wholesale China Polyurea Base Coat Suppliers – SWD9514 Movie props appliance and speaker special polyurea protective coating – SWD , The product will supply to all over the world, such as: Puerto Rico, Estonia, Portugal, With the effort to keep pace with world's trend, we'll always endeavor to meet customers' demands. If you want develop any other new items, we can customize them to suit your needs. If you feel interest in any of our products and solutions or want develop new merchandise, you should feel free to contact us. We are looking forward to forming successful business relationship with customers all over the world.
By Carey from Juventus - 2017.01.11 17:15
High Quality, High Efficiency, Creative and Integrity, worth having long-term cooperation! Looking forward to the future cooperation!
By Prima from New Delhi - 2017.05.02 11:33