Wholesale China Primers Manufacturers – SWD168L polyurea special hole-sealing putty – SWD
Wholesale China Primers Manufacturers – SWD168L polyurea special hole-sealing putty – SWD Detail:
Product features and advantages
*The coating is seamless, tough and compact
*Strong adhesion, excellent impact resistance, collision resistance and wear resistance
*Excellent anti-corrosion and chemical resistance, such as acid, alkali, salt, etc
Application scopes
It is suitable for leveling, joint filling and hole sealing of metal base, concrete and cement mortar plastering.
Product information
Item | Results |
Appearance | Flat and bubble free |
Solid content (%) | ≥90(liquid, no quartz sand added) |
pot life h (25℃) | 1 |
Surface dry time (h) | ≤3 |
Mixing ratio | A:B=1:1, liquid: quartz sand=1:1-2 |
Solid dry time(h) | ≤12 |
Theoretical coverage (dft) | 0.7kg/m2( thickness 1000 um) |
Physical properties
Item | Result |
Adhesive strength | Concrete base: ≥4.0Mpa (or substrate failure)
Steel base: ≥8Mpa |
Impact resistance (kg·cm) | 50 |
Salt water resistance, 360h | No rust, no bubbles, no peel off |
Acid resistance (5%H2SO4,168h) | No rust, no bubbles, no peel off |
Temperature variation resistance (-40—+120℃) | Unchanged |
Application environment
Environment temperature: 5-38℃
Relative humidity: 35-85%
The concrete surface should be PH<10, the substrate water content less than 10%
Dew point ≥3℃
Application tips
Recommended dft: 1000 um
Interval time: min 3h, max 168h, if the maximum interval time is exceeded or there is dust on the surface, it is recommended to use sandpaper to polish and clean before application.
Coating method: scraping
Application note
To ensure the surface is perfect and clean, remove the oil, mold, dust and other attached dirt on the surface, also remove the loose part to make sure it is solid and dry.
Mix the paint evenly before use, pour out the amount to use up, and close the lid immediately. The mixed paint must be used up within 60 minutes. Do not return the remaining products to the original paint barrel.
Mix part A and part B in right ratio, then mix with quartz sand or quartz powder together for use.
Do not add organic solvents or other coatings.
Curing time
Substrate temperature | Surface dry time | Foot traffic | Solid dry |
+10℃ | 6h | 24h | 7d |
+20℃ | 4h | 12h | 7d |
+30℃ | 2h | 6h | 7d |
Product cure time
Substrate temperature | Surface dry time | Foot traffic | Solid dry time |
+10℃ | 2h | 24h | 7d |
+20℃ | 1.5h | 8h | 7d |
+30℃ | 1h | 6h | 7d |
Note: the curing time is different with environment condition especially when temperature and relative humidity changes.
Shelf life
* storage temperature: 5℃-32℃
* shelf life: 12 months (sealed)
* store in cool and ventilated place, avoid direct sunshine, keep away from heat
* package: 20kg/bucket
Product health and safety information
For information and advice on the safe handling, storage and disposal of chemical products, users shall refer to the latest Material Safety Data Sheet containing physical, ecological, toxicological and other safety related data.
Integrity declaration
SWD guarantee all technical data stated in this sheet are based on laboratory tests. Actual testing methods may vary due to different circumstances. Therefore please test and verify its applicability. SWD does not take any other responsibilities except the product quality and reserve the right of any modifications on the listed data without prior notice.
Product detail pictures:
Related Product Guide:
We thinks what prospects think, the urgency of urgency to act from the interests of a client position of theory, allowing for greater high-quality, reduced processing costs, rates are much more reasonable, won the new and previous consumers the support and affirmation for Wholesale China Primers Manufacturers – SWD168L polyurea special hole-sealing putty – SWD , The product will supply to all over the world, such as: Jamaica, Brisbane, Nepal, Due to the stability of our products, timely supply and our sincere service, we are able to sell our products not only over the domestic market, but also exported to countries and regions, including the Middle East, Asia, Europe and other countries and regions. At the same time, we also undertake OEM and ODM orders. We will do our best to serve your company, and establish a successful and friendly cooperation with you.
By Laura from Guatemala - 2018.11.02 11:11
The company's products can meet our diverse needs, and the price is cheap, the most important is that the quality is also very nice.
By Jocelyn from Guatemala - 2017.06.25 12:48